Key Specifications
| Spec |
Detail |
| MSRP |
$1,249.98 |
| Series |
700 |
| Designed For |
Formaldehyde/VOC filtration + Super HEPA at maximum airflow |
| Carbon |
18 lbs activated carbon, formaldehyde and aldehyde calibrated |
| HEPA |
Super HEPA, 99.99% @ 0.3 microns |
| UV-C |
No |
| Airflow |
635 CFM |
| Fan Speeds |
Variable |
| Coverage |
2,500 sq ft at two air changes an hour |
| Housing |
All-metal, pressure-sealed |
| Ozone |
None |
| Ionizer |
None |
| Warranty |
5 yr parts / 10 yr labor |
| Dimensions |
23" high, 15" wide |
Filtration System
Pre-Filter — Captures large particles including construction dust at intake. Protects carbon and HEPA stages. Replace annually.
Carbon Bed — 18 lbs Formaldehyde-Targeted Activated Carbon — Calibrated for off-gassing building materials: formaldehyde from pressed wood, MDF, and adhesives; acetaldehyde and aldehyde compounds; VOCs from paints, varnishes, and sealants; BTX compounds; solvent vapors.
Super HEPA — 99.99% @ 0.3 microns — Rated 99.99% at 0.3 microns, against 99.97% for standard True HEPA. Captures fine construction dust, mold spores, pollen, pet dander, PM2.5, bacteria, and airborne viral particles at maximum efficiency.
Replacement Filter Bundles
Replacement filters for the 700 series are on our replacement filters page.
| Filter |
Suggested Interval |
| Pre-Filter |
Every 12 months |
| Carbon Filter |
Every 2 years |
| Super HEPA Filter |
Every 3–5 years |
Best For
- Larger or higher-ceiling new construction or post-renovation spaces where asthma, severe allergies, or MCS makes Super HEPA's additional particle capture margin necessary
- Sensitive households at high volume where both chemical off-gassing and fine particulate from construction are simultaneous concerns
- Users who need the F614's filtration specification at higher airflow for a more demanding environment
F714 vs. F700: The F700 uses standard HEPA 99.97%. The F714 upgrades to Super HEPA 99.99% — the correct choice when fine particle sensitivity is a compounding concern. F714 vs. F614: The F614 runs at 560 CFM. The F714 provides 635 CFM — the correct choice when greater airflow is needed. F714 vs. F700 DLX: The F700 DLX upgrades the carbon stage rather than the HEPA stage. If maximum formaldehyde adsorption capacity is the priority, the F700 DLX is correct; if maximum particle capture alongside formaldehyde is the concern, the F714 is appropriate.
*Manufactured in Montreal, Canada.*